KAMI DISTRIBUTOR UTAMA PRODUK :
RELIANCE ELECTRIC
RELIANCE MOTOR
RELIANCE MOTOR / RELIANCE ELECTRIC
RELIANCE MOTOR ELECTRIC
Reliance motor atau Reliance Electric adalah juga produk BALDOR MOTOR ELECTRIC .
Jadi bila
Anda mencari produk Reliance motor dan Reliance Electric maka akan ketemu juga
Baldor motor atau Baldor electric.
PT Sarana Teknik Industri dan PT Petro Teknik Persada adalah perusahaan di Indonesia yang menjual produk Reliance Motor [ Reliance Electric ]
Reliance motor
AC dan Reliance motor DC, kedua kategori motor ini dirancang untuk kinerja
optimal dan memiliki daya tahan di segala medan. Single phase - Three phase
General Duty, Brake motors - washdown Duty - Automotive Duty - Vertical Motors -
Inverter Duty.
RELIANCE ELECTRIC / RELIANCE MOTOR adalah nama untuk pemimpin industri dalam motor DC - yang direkayasa untuk memberikan kinerja melebihi yang diharapkan.
Demikian spesifikasi Reliance Electric Motor di bawah ini :
1. Hazardous Locations- Class I Group D locations are atmospheres containing elements such as Gasoline, Hexane, naptha, Benzine, Butane, Propane, Alcohol, Acethone, Benzol, Lacquer Solvent Vapors or Natural Gas.
Class II Group F & G locations are atmospheres containing dust such as (F) Carbon Black, coal or coke Dust, (G) Flour, Strach or Grain Dusts.
2. As required by Underwriters' Laboratories and Canadian Association, Reliance motors Electric with Class II Group F & G approvals must have over temperature protection.
Reliance Motor Electric rated 1 1/2 HP or less have internally mounted automatic thermal overloads when indicated by suffix "A". Caution shoulds be observed when applying these to machinery applications to prevent accidental injury when the thermal device automatically resets and restarts the motor.
Reliance Electric Motor rated 1 HP and larger without automatic thermal overloads have thermostats in the windings. These thermostats are pilot circuit devices to be connected to the magnetic starter circuit.
3. Temperature Ratings and code Numbers : Surface temperatures of Reliance Motor Electric will not exceed the following UL and CSA maximums under fault conditions.
a. Class I Group D listings only. motors with Class B insulation will not exceed surface temperatures of 230 C (446 CF) equivalent to Code T2C. Motors with Class F insulation and 1.15 S.F. will not exceed surface temperatures of 260 C (500F) equivalent to Code T2B.
b Class II Group F & G listings only. Fractional HP motors in Baldor type 34 will not exceed suface temperature of 160 C (320 F) equivalent to Code T3C. Fractional HP motors in Baldor type 35 will not exceed suface temperature of 135 C (275 F) equivalent to Code T4 Motors 1HP and greater built in Baldor type 35. Frames 143T through 326T will not exceed surface temperatures of 160 C (320 F) equivalent to Code T4.
4. Reliance Motor / Reliance Electric is not suitable for applications in temperatures below -25 C (-13 F)
5. All Reliance motor Electric are supplied with Explosion-Proof UL and CSA approved conduit boxes as standard.
6. Reliance motor / Reliance Electric are not approved for use on variable voltage or variable frequency controls (inverter or Vector Drives)
Hubungi kami :
PT Sarana Teknik adalah agen master Reliance motor di indonesia serta produk produk reliance electric lainnya.